Elantra Sport Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
So I just recently finished my 60MM throttle body I got off LKQ. First I completely removed the coolant hose pressed in nipples and also slight port to remove inside lip. I then drilled a hole for Evap line and weled on a 5/16 Nipple. Installed throttle body with a custom U adapter for coolant bypass. Took the car for a drive and instantly notice much better lower end response ( DCT). It made such a huge difference in stop and go traffic. There is one down side that I have notice. It seems to be consuming more fuel now. Anyone else with this modification seeing the same thing? I was roughly around 26mpg combined. Now I'm down to 24mpg combined. I haven't driven the car hard during my mpg testing.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top