Elantra Sport Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1
Ok so these are my dream rims for the car. First things first. Will they fit the Elantra? I know all the people on here will tell me look it up myself but this stuff is really confusing to me. I want the ones that are 18x9 +25mm
What color scheme should I go with? I want to do the black and white but then I was thinking I could do something original like gold or bronze.
 

·
Super Moderator
Joined
·
1,198 Posts
Man, there is next to no info on those. Are they forged or cast? What's the weight per wheel?

Just my own curiosity.
 

·
Registered
Joined
·
84 Posts
The wheels will poke little over an inch. I have 8" with +35 offset and this is how it looks (pic attached). so technically the wheels you want will stick out 20mm more than mine. will fit but if you decide to lower your car, you will need to go with stretched tires and may roll/pull your fenders. hope this helps.


DK
 

Attachments

  • Like
Reactions: EazyG

·
Registered
Joined
·
228 Posts
The offset you should be looking for is anywhere from +45 to +35 (very aggressive), anything lower than that is pointless as you end up with a lot of room on the inside and a lot of poke on the outside. +25 offset with 9" width will stick out over an inch yet have about an inch of spare room inside.
 

·
Registered
Joined
·
99 Posts
That's definitely an extreme wheel setup to be running a +25 offset and a 9 inch wide wheel at that. Were you thinking staggered or square?
 
1 - 5 of 5 Posts
Top