Elantra Sport Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter · #1 ·
I'm installing a Pierce Motorsports 2 point lower tiebar brace and their rear sway bar. Just wondering if anyone has the specs on what the bolts in the frame in the front should be torque'd to and what the bolts on the bushing brackets and end links need to be torque'd to?
 

·
Registered
Joined
·
188 Posts
No idea on the tiebar, but with my SXTH Element sway bar I had to tighten the end link bolts down as much as I physically could otherwise I'd hear noise. Give it the "all of the torques" setting.
 

·
Registered
Joined
·
338 Posts
I'm installing a Pierce Motorsports 2 point lower tiebar brace and their rear sway bar. Just wondering if anyone has the specs on what the bolts in the frame in the front should be torque'd to and what the bolts on the bushing brackets and end links need to be torque'd to?
If you have dial or digital torque wrench you can estimate it be getting a reading on the loosening torque.
You can also look up the fastener torque based on it's size and grade
 
1 - 3 of 3 Posts
Top